Monocular Waveguide 0.23" 640*400 OLED Display Module For Head Up Display

Sony 336C 0.23 Inch Waveguide 640 * 400 OLED Micro Display Module For HUD

Product introduction

0.23 inch optical waveguide module is composed of three parts, an OLED ( Organic Light-Emitting Diode ), an optical engine and a geometrical waveguide. The OLED image collimated by the optical engine; the final imaged will be guided into the geometrical waveguide. Finally, an 52” virtual image displays at 3 meters away, the FOV (Field of View) can reach 25 degrees at that point.

The OLED uses Sony 336C.

Product Details

Power up sequence

• Set XCLR to low and turn on 1.8V power supply to initialize.
• 1ms after completion of 1.8 V power supply rising, set XCLR to high, then the panel changes to the power-saving mode.
• After XCLR set to high, turn on 10V power supply.
• Implement all the register settings and perform PS register off by serial communication to cancel power-saving mode.
• Then the panel changes to the normal state.

The display mode of the binocular module

The left-eye module is worn on the user’s left-side and the optical imaging will display in front of the left eye. The right-eye module is worn on the user’s left-side and the optical imaging will display in front of the right eye.

640*400 OLED Display Module

Monocular Waveguide OLED Display Module

0.23" HUD Display Module

Monocular Waveguide 0.23" 640*400 OLED Display Module For Head Up Display Images